Poor Man's Plasma

Magnum has sold the "Poor Man's Plasma" kit to thousands of customers who are looking for an inexpensive way to use a tool to cut, gouge, and pierce materials despite their condition or laminated consruction.

What you get: 

• Heavy Duty Magmafusion brass torch.

• 15' high grade 3/8" oxygen hose.

• 15' 12 volt ignition cables.

• 50 Magmafusion plasma cutting and piercing tubes.

• CGA 540 oxygen regulator.

Everything you need to start cutting, gouging, piercing and dismantling.

Customers: Farmers, independent contractors, and field repair and maintenance personnel. 

Features:

• No faster process on the market.

• 4x faster than oxyacetylene.

• 10,000 degrees is  game changer.

• Magmafusion plasma tubes can be bent for all position access.

• Magmafusion plasma tubes are extendable for additional reach.

• Burn through almost any material.

• Over 24 separate processes from a single plasma tube.

  • Cut

  • Gouge

  • Pierce

  • Sharpen

  • Wash

  • Shape

  • Chamfer

  • Frag rocks

  • Remove hardfacing

  • Vent

• Highly field portable.

• 12  volt battery ignition.

Testimonials

Small Fabrication Shop Owner - Custom Metalwork

"Poor Man's Plasma has completely changed my business. I was quoted $8,000 for a used plasma cutter, but this system cost me a fraction of that and cuts just as clean. I've cut through 1-inch steel plate, stainless exhaust systems, and aluminum panels—all with perfect results. My customers can't tell the difference between my cuts and expensive plasma work" - Mike R., Fabrication Shop Owner.

Farm Equipment Repair - Rural Operations

"On a farm 40 miles from the nearest welding supply store, Poor Man's Plasma is a lifesaver. I've repaired broken plow blades, cut rusted bolts off tractors, and fabricated new mounting brackets—all without leaving the property. The portability means I can take it out to the field where the equipment broke down. Best investment I've made for the farm" - Bill H., Farmer & Equipment Operator.

Auto Restoration Enthusiast - Classic Cars

"I'm restoring a 1967 Mustang and Poor Man's Plasma has been essential for cutting out rusted floor panels and fabricating custom brackets. The clean cuts mean less grinding and better fit-up for welding. For a hobbyist like me, it's affordable enough to justify for one project, but I know I'll use it for years" - Tony M., Auto Restoration.

Maintenance Supervisor - Manufacturing Plant

"We keep Poor Man's Plasma in our maintenance shop for emergency repairs. When a conveyor frame cracked at 2 AM, we cut out the damaged section and welded in a replacement before the morning shift. No waiting for contractors, no expensive plasma cutter sitting idle 90% of the time. It's paid for itself ten times over" - Jennifer M., Maintenance Supervisor.

Scrap Metal Processor - Recycling Yard

"I process 20 tons of scrap metal weekly and Poor Man's Plasma cuts through everything—rebar, I-beams, pipe, sheet metal. It's faster than a torch for thick material and uses less gas. My oxygen and fuel costs dropped 30% after switching to this system for most cutting jobs. The ROI was under two months" - Ray D., Scrap Yard Owner.

HVAC Contractor - Commercial Installation

"Poor Man's Plasma cuts ductwork cleaner and faster than shears or snips. I can cut complex shapes in heavy-gauge galvanized steel without deforming the edges. The system fits in my van alongside my other tools, and I can run it off my existing welding machine. It's become my go-to tool for custom ductwork" - Carlos V., HVAC Contractor.

DIY Homeowner - Property Projects

"I bought Poor Man's Plasma to cut steel posts for a fence project and ended up using it for a dozen other jobs—cutting rebar for a concrete pour, trimming steel roofing, even cutting through old lawn mower decks for disposal. For under $500, it's given me capabilities I never thought I'd have at home" - Steve K., Homeowner.

Welding Instructor - Community College

"We teach Poor Man's Plasma in our advanced cutting class because it's a real-world solution students will actually use in the field. Many small shops can't afford plasma cutters, so this technique is valuable knowledge. Students are amazed at the cut quality they achieve, and it reinforces their understanding of oxygen-fuel chemistry" - Professor Martinez, Welding Technology.

Pipeline Repair Technician - Oil & Gas

"In remote pipeline locations, Poor Man's Plasma lets us make precision cuts for repair sections without hauling heavy plasma equipment into the field. We've cut through 6-inch schedule 80 pipe in minutes. The system works with our existing cutting torches and gas cylinders, so there's no additional equipment to transport" - Jake T., Pipeline Technician.

Metal Artist - Sculptural Work

"Poor Man's Plasma gives me the precision I need for intricate metal sculptures without the $10,000 investment in a CNC plasma table. I've cut complex curves in 1/2-inch steel plate and the edges are smooth enough to weld directly without grinding. It's expanded my artistic capabilities tremendously" - Sarah L., Metal Artist.

Equipment Rental Company - Tool Fleet

"We added Poor Man's Plasma to our rental inventory and it's been a hit with contractors. They can rent it for $45/day versus $125/day for plasma cutters. Our customers love the cost savings, and we love the rental income. The system has rented 180 days in the first year—that's excellent utilization" - Tom R., Rental Company Manager.

Municipal Maintenance Department - Budget-Conscious Operations

"Our city maintenance budget doesn't allow for expensive equipment purchases. Poor Man's Plasma gave us professional cutting capabilities for the price of a few tanks of gas. We've used it for street sign repairs, park equipment maintenance, and water system work. The city council was impressed with how far we stretched the budget" - David K., Municipal Maintenance.

Structural Steel Fabricator - Commercial Construction

"Poor Man's Plasma cuts through 2-inch steel plate like butter. The cut quality rivals our shop's plasma table for anything under 3 inches thick. I use it for field modifications where dragging the plasma cutter isn't practical. The speed and clean edges have made me a believer in this technique" - Frank D., Structural Fabricator.

Automotive Exhaust Shop - Custom Systems

"I cut stainless steel exhaust tubing all day with Poor Man's Plasma and get zero warping or heat distortion. The cuts are square and clean, which means perfect fit-up for TIG welding. I tried plasma cutters but they were overkill for tube work—this system is perfect for what I do" - Alex T., Exhaust Specialist.
Industrial Demolition Contractor - Teardown Projects

"We use Poor Man's Plasma for cutting structural steel during building demolitions. It handles rusty, painted, and corroded steel without any issues. The system works in any position—vertical, overhead, or horizontal—which is essential for demolition work. We've cut through everything from I-beams to reinforced concrete rebar" - Paul K., Demolition Contractor.

Railroad Maintenance Crew - Track Repair

"Poor Man's Plasma cuts through railroad track steel faster than our abrasive saws and with less noise. We can make precision cuts for rail replacement sections in the field. The portability is critical since we work miles from our shop. This system has become standard equipment on our maintenance trucks" - Chris B., Railroad Maintenance.

Boat Repair Technician - Marine Services

"I repair aluminum and steel boats and Poor Man's Plasma handles both materials perfectly. The clean cuts in aluminum don't leave the jagged edges that saws create, and it slices through marine-grade stainless steel hardware with ease. The system works in my small shop without needing expensive electrical upgrades for a plasma cutter" - Ian M., Boat Repair.

Beginner Welder - Learning Metalwork

"I'm new to metalworking and was intimidated by cutting thick steel. Poor Man's Plasma was easy to learn—if you can use a cutting torch, you can use this. The online videos showed me exactly what to do, and I was making clean cuts within an hour. It's given me confidence to tackle bigger projects" - Robert K., Hobbyist.

Retired Machinist - Home Workshop

"After 40 years in machine shops, I know quality equipment when I see it. Poor Man's Plasma is brilliantly simple—it uses basic oxy-fuel principles in a clever way. The technique is easy to master and the results are professional-grade. I recommend it to everyone in my metalworking club" - George H., Retired Machinist.

Agricultural Equipment Dealer - Field Service

"Our service techs learned Poor Man's Plasma in one training session and now use it daily for equipment repairs. The simplicity means less can go wrong in the field, and the technique works with the cutting torches they already carry. Training time was minimal and adoption was immediate" - Michelle K., Service Manager.

Mobile Welding Service - On-Site Repairs

"Poor Man's Plasma fits in my service truck alongside my welding machine and gas cylinders. I don't need to carry a separate plasma cutter, generator, or compressor. When customers call for cutting jobs, I have everything I need already on board. The portability has helped me win contracts against competitors with bigger rigs" - Tony V., Mobile Welder .

Construction Site Supervisor - Field Fabrication

"On construction sites, Poor Man's Plasma lets us make precision cuts without running electrical power to remote locations. We use it with our existing gas cylinders and cutting equipment. The system has eliminated delays waiting for shop-cut pieces—we fabricate on-site and keep the project moving" - Lars N., Construction Supervisor.

Emergency Response Team - Disaster Recovery

"During disaster response operations, Poor Man's Plasma has been invaluable for cutting through collapsed steel structures. It's lightweight enough to carry into debris fields and works without electricity. We've used it in three major recovery operations and it's performed flawlessly in challenging conditions" - Captain Stevens, Emergency Response.

Job Shop Owner - Mixed Metalwork

"I own both a plasma cutter and Poor Man's Plasma. For material over 1 inch thick, Poor Man's Plasma actually cuts faster and cleaner than my 45-amp plasma. I use plasma for thin sheet metal and Poor Man's for heavy plate. Having both gives me the best of both worlds, and Poor Man's cost 1/10th what the plasma did" - Richard P., Job Shop Owner.

Maintenance Technician - Industrial Plant

"Our plant has two plasma cutters in the main shop, but I keep Poor Man's Plasma in my toolbox for field repairs. I don't have to wait for shop access or drag extension cords across the plant floor. For emergency repairs, it's actually faster than plasma because I can set up and cut in minutes" - Dave S., Maintenance Tech.

Fabrication Instructor - Trade School

"We teach both plasma cutting and Poor Man's Plasma in our program. Students need to understand that plasma isn't always the answer—sometimes a $400 solution is smarter than a $6,000 machine. Poor Man's Plasma teaches problem-solving and resourcefulness, which are just as important as technical skills" - Master Chief Rodriguez, Instructor.