500 amp Lincoln powered exothermic cutting system, 800-957-4344

MagnumUSA

MAG2000G5

500 Amp Cutting System


800-957-4344

760-868-6748

mag2000g5 500 amp lincoln powered exothermic cutting and arc welding system by MagnumUSA, 800-957-4344

BROCHURE

500 amp cutting system. A turn key system in gas or diesel with high pressure oxygen cylinders to handle any demand. Ships with the following:

  • Lincoln 500 amp DC welder with auxilliary power for lights and tools.
  • Top valve cutting torch with spare collets.
  • Fifty foot umbilical with lugs and heavy duty ground clamp.
  • Blade cutting rods.
  • Welding handle 400 amp.
  • Heavy duty line switch on both cables is safer than knife switch.
  • Six 300 psi composite oxygen cylinders plumbed with CGA 540 connectors.
  • Two stage oxygen regulator with CGA 540 connector.
  • Weight: 1690 lbs.
  • Pallet: One, 6' x 4' x 4'

Welder Specification: When you need it all, consider the rugged Air Vantage 500 for railroad, mining, heavy-duty construction, and rental fleet use. A direct gear-driven compressor, with no belts or clutches to wear out, pumps out plenty of air for arc gouging, plasma cutting or almost any air tool. This Air Vantage 500 Welder/Generator and Air Compressor has powerful 500 amps at 100pct duty cycle which is enough for almost any stick, TIG, MIG or flux-cored welding project. And, the precision arc starting provided by Lincoln Chopper Technology and Touch-Start TIG will make any operator a better welder. Don't pay extra for plenty of AC generator power - up to 20,000 watts of 3-phase and 12,000 watts of 1-phase is standard. Stainless steel roof and side panels provide added durability and corrosion-resistance. The reliable Cummins B3.3 water-cooled diesel engine will keep you running - and working - for a long time. Features: Rotary Screw Compressor . VMAC brand rotary screw direct-drive air compressor rated at 60 CFM, 100 PSI, 100pct duty cycle. Delivers abundant air for arc gouging with up to 3/8'' carbons, plasma cutting (plasma cutter sold separately) and air tools such as an impact gun. Plenty of AC Generator Power. 20 kW continuous 3-phase 240V AC generator power will operate industrial equipment such as plasma cutters, pumps, inverter welders and grinders. 12 kW continuous 1-phase AC generator power for common construction tools and lights. Stainless Steel Enclosure. Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates need to replace these items due to paint damage or rust. Sliding Engine-Access Door - Lockable engine-access door slides open for easy access in tight spaces. Simple to Operate. Use the mode switch to select one of four Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start DC TIG or CV Wire. Then dial in the desired output Processes: TIG. Stick. MIG. Flux-Cored. Gouging.

500 amp rated output.

40 volts.

100 percent duty cycle.


LINKS


We accommodate special orders and routinely provide technical cutting advice for marine and land applications.