Exothermic cutting rods land and sea, MagnumUSA, 800-957-4344

MagnumUSA

Land Cutting Rods


800-957-4344

760-868-6748

Most reliable and highest performance exothermic land cutting rods and cutting blades for cutting, gouging and piercing

MSDS

Patented oxyarc cutting rods.


MSHA Approved. NIOSH Approved.


High quality seamless tubing with combustible inner spoke fuel for maximum speed, power and performance. Cutting rods boast a 2" safety standoff and can easily be bent for all position access. Tubes are ignited using DC voltage and can be reignited for elevated economy. Collets allow for different diameter cutting rods and take less than five seconds to replace. In all, there is no faster, more powerful or more versatile cutting instrument on the market.

exothermic or endothermic oxygen lances or flame cutting rods fit all exothermic cutting torches


MAG1418 exothermic cutting rods

Ideally suited for cutting up to 1/2" bar, making fairly precise holes and removing small welds.

  • Size: 1/4" x 18"
  • Quantity: 100 per box
  • Weight: 20 lbs.

MAG1436 exothermic piercing rods

Longer lengths for longer burns, deeper pierces and greater position when bent.

  • Size: 1/4" x 36"
  • Quantity: 30 per box
  • Weight: 42 lbs.

MAG3818 exothermc cutting rods

The most advanced cutting rod on the market in the most popular size. Cut, gouge, pierce, remove hardfacing and much more.

  • Size: 3/8" x 18"
  • Quantity: 50 per box
  • Weight: 20 lbs.

For commercial volume users we offer palleted shipments of 100 boxes. Pallet: 100 boxes of MAG3818 - - Weight: 2025 lbs.


Exothermic pin or plate piercing with a magnum exothermic, endothermic, oxythermic cutting lance and burning bar

MAG3836 exothermic piercing rods

Used most frequently for piercing pins or cutting through large bucket hooks on heavy equipment.

  • Size: 3/8" x 36"
  • Quantity: 50 per box
  • Weight: 42 lbs.

MAG3860 exothermic salvage rods

Five feet of piercing power to bore through almost any pin, cut large steel, or pierce through boulders in rock crushers. Lightweight and easily bent.

  • Size: 3/8" x 60"
  • Quantity: 50 per box
  • Weight: 62 lbs.

MAG1218 exothermic cutting rods

Larger diameter for maintenance and dismantling projects. Easily removes large weldments in seconds.

  • Size: 1/2" x 18"
  • Quantity: 30 per box
  • Weight: 20 lbs.

MAG1260 exothermic burning bars

Larger diameter and length for cutting, gouging and piercing projects associated with salvage and dismantling. Large, yet smooth to operate.

  • Size: 1/2" x 60"
  • Quantity: 30 per box
  • Weight: 62 lbs.

Patented Arc Cutting Rods

Patented oxyarc cutting rods operate at modest 225 amps and will cut up to 20 minutes, MagnumUSA, 800-957-4344

Operate on oxygen and use carbon inner fuel with 225 amp welder for quiet operation with increased cutting speed. Ideally suited for restricted noise situations encountered with scrap, dismantling, salvage and repair of heavy equipment and mining assets. VIDEO

MAG3800 oxyarc cutting rods

Patented oxyarc cutting rods. Ideally suited for dismantling and salvage assignments. Simply put, they last longer.

  • Size: 3/8" x 18"
  • Quantity: 50 per box.
  • Weight: 13 lbs.

MAG1200 oxyarc cutting rods

Patented oxyarc cutting rods. Ideally suited for thick dismantling and salvage projects.

  • Size: 1/2" x 18"
  • Quantity: 30 per box.
  • Weight: 11 lbs.

exothermic land cutting lances, rods or burning bars for maintenance, repair, salvage, dismantling, emergency response, civil defense

Burning Bars


LINKS


We accommodate special orders and routinely provide technical cutting advice for marine and land applications.